Threaded Plug Inserts for Handle Anything Chuck 8mm (6 Pack)

Threaded Plug Inserts for Handle Anything Chuck 8mm (6 Pack)The Threaded Plug Inserts are designed for 8mm kits and can be used with the Handle Anything Closed End System #PKHASET1. To use, press the threaded plug into one end of a 8mm kit tube and then drill a blind hole with an 8mm drill bit to the correct depth. This hole should accommodate the entire length of the tube and plug. After drilling, glue the tube with the plug into the blank and allow it to cure. Once cured, you can thread the mount onto Handle Anything Chuck with #PKTC06 Mandrel Rod and bushings for the kit. Turn the tube with tailstock support and then turn off the support section for sanding and polishing.